Hydrocyclone separator

Hydrocyclone separator

Hydrocyclone separator neutralizes negative effects of solids on pumping system and increases pump MTBF. Developed and designed in ooperation with national university of oil & gas “GUBKIN UNIVERSITY”


Hydrocyclone separator is designed to neutralize or substantially reduce negative effects of solids penetrating into operating parts of pumping system and surface equipment.


  • High separation coefficient – up to 95%
  • Adjustable sand trap length – 33-330 ft (10-100 m);
  • Bypass valve prevents pump gas lock if sand trap is full;
  • Corrosion-resistant steel liner protects separator body from abrasive wear;
  • Sealing section tightly fits casing and shuts off annular space;


  • Prevents early wear of downhole pumping equipment;
  • Reduced risk of failure of downhole pumping equipment caused by pump clogging;
  • Longer runlife of pumping equipment;
  • Reduced well repair cost;
  • Higher efficiency of pumping equipment.;

Order reference

20 (2 3/8”) – tubing ID
146 (5 3/4”) – casing ID
9 (0.35”) – casing wall thickness

Technical specification

  • Pump type:
  • Casing ID, inch (mm):
  • 5 3/4 (146), 6 5/8 (168), 7 (178)
  • Anchor setting angle, degree:
  • up to 55
  • Flow rate, bopd (m3 /d):
  • up to 3144 (500)

    Ask question or leave an inquiry

    Clicking on the button “Send”, I agree with the terms of the Privacy Policy